Power Tank Power Shot Trigger System Emergency Roadside Tire Patch and Filler
How many of us have had to change a flat tire? How many of you are comfortable doing this or are worried that a family member may not be comfortable in doing this? Road side assistance is not always available and what if your cell phone doesn't have service or is dead? Changing a tire on the side of a highway is not the ideal situation for safety because odds are that you didn't end up on a flat and level surface to jack the car off the ground.
This is were the Power Shot Trigger System from http://powertank.com/ comes in. Anyone can fix a flat tire safely in about 5 minutes without even having to jack the car up. The kit comes with everything you need including a 20oz CO2 bottle. The bottle is shipped empty but can be filled for between $3 to $5 at most sporting goods stores or any paintball shop. This bottle is good for between 3 to 5 complete fills of an SUV tire. Follow these quick and easy steps and follow this link to get one for yourself or a someone else. http://powertank.com/products/sfID1/45/listPage/2/productID/115
Click on any image to enlarge.
This is were the Power Shot Trigger System from http://powertank.com/ comes in. Anyone can fix a flat tire safely in about 5 minutes without even having to jack the car up. The kit comes with everything you need including a 20oz CO2 bottle. The bottle is shipped empty but can be filled for between $3 to $5 at most sporting goods stores or any paintball shop. This bottle is good for between 3 to 5 complete fills of an SUV tire. Follow these quick and easy steps and follow this link to get one for yourself or a someone else. http://powertank.com/products/sfID1/45/listPage/2/productID/115
Click on any image to enlarge.
|
Step one, locate the puncture:
|
Step two, open your repair kit
|
Nail in the tire
|
What's included
|
|
Step three, remove the nail with the supplied pliers
Remove nail
|
Nail removed from tire
|
Step four, insert the ream into the tire and enlarge/smooth the hole.
Hole Ream
|
|
Step five, place a tire plug through the eye of the insert tool and apply the grease from the kit to the plug and tip of the needle
Greased tire plug on needle
|
Step six, insert tire plug into hole. It will take some pressure to get it in. If it wont go in, then use the ream tool some more.
Insert tire plug.
|
|
Step seven, cut the tire plug off flush with the tire
Cut extra plug off
|
Step eight, thread the hose onto the bottle and fill your tire by pulling the trigger. https://youtu.be/2FBqwD2hNgQ
|
Step nine, check your air pressure with the supplied
tire gauge to insure proper inflation and your done.
tire gauge to insure proper inflation and your done.
Check the psi
